EFG-Color-Logo-full-name-tag
EFG-Color-Logo-full-name-tag

Design Assist Program

Use Our Pump Station Expertise

Leverage Excel Fluid Group's engineering expertise to inform, support, and guide pump station design elements during your pump station design phase with one of our three levels of our Design Assist Program. We'll work with you to provide conceptual, and comprehensive pre-construction documentation to ensure you establish a pump station design that meet all of your key project stakeholder's requirements.

Standard

DAP - Wet Well Design Calculator

Level 1: Free Resources

  • Pump Recommendations
  • Standard 3D Drawings/Equipment Specification Flyers
  • Budgetary Pump Station Proposal
  • Electrical One-Line and Load Summary Report
  • Flow Rate, Total Dynamic Head, and System Curve Calculations
  • Wet Well Sizing Calculations and Report (3rd party certified)
  • Past Project Example Information (case studies, submittal information, as-built drawings, etc.)

P.E. QualifiedDAP - HDPE Buoyancy Spec Chart

Level 2: Paid Resources

  • Pump Recommendations
  • Standard 3D Drawings/Equipment Specification Flyers
  • Budgetary Pump Station Proposal
  • Electrical One-Line and Load Summary Report
  • Flow Rate, Total Dynamic Head, and System Curve Calculations
  • Wet Well Sizing Calculations and Report (3rd party certified)
  • Past Project Example Information (case studies, submittal information, as-built drawings, etc.)
  • Project-specific design report (hydraulics, sequence of operation)
  • Project-specific 3D Drawings/ CSI Formatted Specifications
  • 3rd party P.E. stamped hydraulic analysis report
  • Permit to Install (PTI) assistance
  • Generator sizing report
  • Up to 3 virtual design meetings
  • One (1) jobsite or in-person meeting

P.E. CertifiedDAP - PRY9A Data Center Pump Station Drawing

Level 3: Paid Resources

  • Pump Recommendations
  • Standard 3D Drawings/Equipment Specification Flyers
  • Budgetary Pump Station Proposal
  • Electrical One-Line and Load Summary Report
  • Flow Rate, Total Dynamic Head, and System Curve Calculations
  • Wet Well Sizing Calculations and Report (3rd party certified)
  • Past Project Example Information (case studies, submittal information, as-built drawings, etc.)
  • Project-specific design report (hydraulics, sequence of operation)
  • Project-specific 3D Drawings/ CSI Formatted Specifications
  • 3rd party P.E. stamped hydraulic analysis report
  • Permit to Install (PTI) assistance
  • Generator sizing report
  • Up to 8 virtual design meetings
  • Up to 5 jobsite or in-person meeting
  • Buoyancy and structural calculations stamped by 3rd party P.E.
  • Finite Element Analysis (FEA) report (for HDPE wet wells)
  • Control panel layouts, BOM, wiring schematics (stamped by 3rd party electrical engineer)

Additional Services Available

  • 3D Renderings of Pump Stations

Exclusions

  • Site Surveying
  • Engineer of Record (EOR) responsibility
  • Fire hydrant Flow testing
  • Hydrologic modeling
  • Geotechnical services